Product ID:GUN PROPELLANT, AXF-3663
MSDS Date:03/01/1989
FSC:9110
NIIN:00N014071
MSDS Number: BKKMH

AEROJET SOLID PROPULSION

SACRAMENTO, CA 95852-1699
US

Emergency Phone: 916-355-4770

Info Phone: 916-355-4770

Cage: 58339

AEROJET SOLID PROPULSION CO

15699C SACRAMENTO, CA 95852-1699 US

Telephone: 916-355-5124

Cage: 58339

POLY (3-AZIDOMETHYL-3-METHYL OXETANE) (AMMO)

Fraction By Weight: 18-27%

CYCLONITE

CAS: 121-82-4

RTECS: XY9450000

Fraction By Weight: 70-80%

OSHA PEL S, 1.5 MG/M3

ACGIH TLV: S, 1.5MG/M3; 9192

POLY (3,3-BIS AZIDOMETHYL OXETANE) (BAMO)

Fraction By Weight: 2-3%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN. AVOID SKIN CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:WASH W/WATER FOR AT LEAST 15 MINUTES. CALL MD. SKIN:WASH
W/SOAP AND WATER. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O*2/ARTIFICIAL RESPIRATION) . INGEST:CALL MD IMMEDIATELY.

Extinguishing Media:SPRINKLER OR DELUGE SYSTEM ONLY. DO NOT FIGHT
EXPLOSIVE FIRES!
Fire Fighting Procedures:DO NOT ATTEMPT TO EXTINGUISH FIRES INVOLVING
EXPLOSIVE!
Unusual Fire/Explosion Hazard:BURNS IF SUBJECTED TO FLAME AND CAN
EXPLODE IF CONFINED.

Spill Release Procedures:CLEAN UP ALL SPILLS IMMEDIATELY W/NON-SPARKING
OR NON-METALLIC TOOLS AND RAGS DAMPENED W/ACETONE. WEAR PROPER
PERSONAL PROTECTIVE EQUIPMENT, GLOVES, RESPIRATOR, ETC.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:HANDLE W/CARE TO PREVENT EXPOS TO
FLAME, SPARK, IMPACT, FRICTION & HEAT ABOVE 200F UNLESS REVIEWED &
APPROVED BY SAFETY ENGINEERING. (SEE SUPP DATA)
Other Precautions:EXPLOSIVE IS DESIGNED TO BURN VIGOROUSLY UNDER
CONFINED CONDITIONS. IF IGNITION IS RECOGNIZED EVACUATE THE AREA
IMMEDIATELY.

Respiratory Protection:NONE REQUIRED (MFR). USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENTILATION IS ADEQUATE.
Protective Gloves:NEOPRENE RUBBER-UNCURED, COTTON-CURED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT FOR LAB QUANTITIES. FLAME-PROOF
COVERALLS SUITABLE TO AVOID SKIN CONTACT FOR LARGER QUANTITIES.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE AND BEFORE
EATING, SMOKING OR USING SANITARY FACILITIES .
Supplemental Safety and Health
HNDLG/STOR PREC:ALL PROPELLANTS MUST HAVE A MINIMUM OF ANTI-STATIC
PLASTIC COVERING. WHEN HANDLING USE GROUNDING ATTACHMENTS.

HCC:E2
Spec Gravity:1.6
Solubility in Water:0
Appearance and Odor:SOLID, WHITE, ODORLESS.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
FLAMMABLE SOLVENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.

Waste Disposal Methods:NORMALLY MATERIAL IS THERMALLY TREATED ON SITE.
CONTACT CENTRAL WASTE MANAGEMENT, THERMAL TREATMENT SECTION
(X4257/4265) FOR PROPER PROCEDURES AND CURRENT DISPOSAL METHODS,
I/A/W FEDERAL, STATE AND LO CAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.